Macintosh SE Spécifications télécharger pdf (Page 44)

Take Apart Video Board - 17

1 Carefully pull the video

board straight off the

neck of the CRT.

2 Disconnect the video

board connector from the

analog board.

3 Remove the Torx screw

and video ground wire

from the upper-left

CRT mounting bracket.

Replacement Note:

If you

replace the video board,

perform the video

adjustment procedure. See

“Video” in Adjustments.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 88 89

Pas de commentaire

Macintosh SE Spécifications Page 44